How to Make A Clock Quieter : 6 Easy Methods

 Ever desired to simply take a seat down in silence to loosen up or meditate for half-hour? Then, you recognize how noisy the ticking sound of your clock is and it simply begins off evolved traumatic you.

Or perhaps it’s overdue and you’re having a hard time falling asleep, whilst you all at once listen the tick-tock of that clock, stopping you from drifting off.

Read directly to discover the purpose at the back of that tense ticking noise and the way to make a clock quieter.

Why Do the Hand of My Clock Ticking So Loud?

Person protecting ear with  pillows


As your quartz clock count the second, its mechanisms will making a ticking sounds. Old-long-established pendulum clocks produce the loudest sound of them all, however that is due to their heavy mechanisms that remaining longer.

Modern wall clocks need to theoretically provide you a quieter sound. However, in case you’re studying this article, possibilities are you recognize that isn’t continually the case.

The number one purpose wall clocks tick so loud is due to the reasonably-priced substances and components they use. Cheap components suggest thinner substances and decrease tolerances for sound than the ones fabricated from superb substances.

They additionally make reasonably-priced clocks with a pulsed electromagnet this is powered through batteries. This works through pulsing the magnet to transport the components, a good way to therefore additionally circulate the fingers.

The aggregate of the regular pulsing each 2d and the motion of reasonably-priced and probable flimsy components creates greater ticking sound than you'll need. So, in case you’re the usage of a wall clock that got here as a freebie somewhere, possibilities are this reasons your woes.

More luxurious wall clocks use a pulsed motor to transport their additives, making it quieter. Plus, those sorts of clocks not often have a 2d hand, or have one which handiest rotates in place of ticking.

If you need to keep away from this trouble altogether, we advocate deciding on a barely greater luxurious clock to start with. Using better great components will save you this ticking noise. And thinking about how lengthy clocks remaining anyway, that is a in reality easy decision.

But in case you have already got an current clock and don’t need to shop for a brand new one, right here are some methods you could quiet that tick-tock.

How to Make a Clock Quieter : Quick Rundown


There are 6 most important methods you could quiet a noisy ticking clock:

 Add mass on your clock’s mechanism
 Replace it with a most important-powered clock
 Lubricate the mechanism
 Put the clock in a box
 Change the clock
 Get a brand new clock

Method 1: Add Mass to Your Clock’s Mechanism


Majority of today’s clocks get rid of the complex additives that vintage clocks have and use a tiny ticking mechanism and motor geared up at the lower back to rely down and circulate the fingers.

This technique for the clock mechanism is superb for wall striking clocks. Bedside or alarm clocks differ, as they have got their mechanism housed withinside the identical unit.

Note that even as this technique will paintings with a bedside or alarm clock, it can be nice to apply the opposite techniques below.

Just like everyday soundproofing, this works through including layers to dam the sound generated on the supply: the mechanism in the back of the clock. We don’t suggest paper towels for this.

Remember that this may handiest block the sounds coming from the lower back of the clock. You will nevertheless listen ticking from the clock’s face. It will even handiest lessen the sound and by no means absolutely block it.

How to Adding Mass to Your Walls Clock’s Mechanism


 Take your wall clock off the wall and discover the motor withinside the middle of the backside.
 Get a chunk of material this is massive sufficient to cowl the ticking mechanism. Make certain there's a few to spare. Try to apply a fabric this is dense to dam out maximum of the sound.
 Use packing tape and vicinity the cloth. Make certain to absolutely cowl the rims and create a decent seal across the ticking mechanism. No vicinity for gaps right here.
 Don’t neglect about to copy this each time you want to update the batteries or manually modify the time.

For Desk and Alarm Clocks


For a table or alarm clock, you haven't any desire however to wrap it all in a towel or quilt. You may even attempt a soundproofing material, like mass loaded vinyl or foam padding, to make it soundproof.
Method 2: Replaced Your Wall Clock with a Mains Powered Clock

Nearly all clocks we use at domestic now are powered through replaceable batteries. After all, we usually use our TV, phones, or smartwatch to test the time in our room, so why hassle spending on a greater luxurious clock?

Clocks which might be linked to the mains will synchronize their time the usage of the mains’ frequency. This approach that they'll in all likelihood now no longer have a 2d hand, which reasons that incessant ticking sound.

And despite the fact that they have got this component, this may in all likelihood be the rotating kind, as opposed to the sort a good way to create a noisy ticking clock.

Mains-powered clocks may also sync to radio frequencies as an alternative. You also can get AA battery-powered radio clocks that make nearly no noise.

Try seeking out a silent non-ticking clock and spot in case you locate one you like.

Method 3: Oil Your Clock’s Mechanism


Oiling is the standard manner to make transferring components run smoother and quieter. This is the identical purpose you oil your bike’s chains or different tools, and also can assist you with that loud ticking clock.

As a warning, this technique is the maximum tough in comparison to the others, because it would require a mild contact and a few know-how of the way clock mechanisms paintings, in case you don’t need to by accident smash or harm your clock.

Clock mechanisms are pretty touchy and may be very vulnerable to even the smallest of mistakes.

Note that this won’t paintings for maximum reasonably-priced clocks, as they'll now no longer allow you to get right of entry to the inner of the ticking mechanism.

However, to test if you could use this, see if there are screws conserving the duvet or clock face in vicinity. Then, take the wall clock aside to look what you're coping with.

You will want to apply a distinctiveness clock oil to do this, as different forms of oil can be too heavy in your clock. This approach they might forestall the mechanism from running altogether.

This technique can lubricate the mechanism and upload anxiety to the gears, that could lessen their noise.

If you’re oiling the mechanism to make it quieter, you could want heavier oil consisting of the 5W or 20W in order that it could upload all that more weight.

Steps to Oil Your Clock Mechanism


 Remove the lower back panel to reveal the mechanism inner. Use this time to become aware of the additives and parent out what you’re coping with.


 If you come across any knobs poking thru the lower back panel, attempt pulling them off or unscrewing them. Be gentle! You don’t need to by accident destroy your wall clock right here. Also, keep in mind which is going where. We advocate taking some photos so that you can placed them lower back collectively.


 Now, open the mechanism housing. Be very cautious on this step. Any compelled motion may shake the gears out.


 Look for the equipment this is being moved through a tiny coil. This actions the fingers of your ticking clock, because of this that it's also the supply of that clock tick.


 Locate the equipment that #four is hooked up to as you may additionally ought to lubricate this.


 Using the stop of a toothpick which you dipped withinside the oil, cautiously vicinity a unmarried drop of heavy oil on those  unique gears. Do this through beginning out with the equipment’s bearings first, then slowly spreading the oil out to the teeth.


 If you're the usage of the lighter distinctiveness clock oil, spray a small quantity at the mechanism to coat all of the gears.


 Regardless of which oil you're the usage of, depart the wall clock open for at the least half-hour to allow any extra oil evaporate.


 Finally, placed the entirety lower back collectively in opposite and update the panel. This is frequently the maximum tough component in case you paid little attention, so that you’re in all likelihood happy you took the ones photos we advised you about.

Method four: Put Your Clock in a Container


If you’re coping with a noisy alarm clock, bedside clock, or table clock, that is probable the nice technique for you.

Choose a box this is hermetic in order that not one of the tick-tock will escape. If you could’t locate that, at the least make certain the box is as heavy as possible. Then, simply take the clock and placed it inner.

For example, you could attempt the usage of a Mason jar. They make those to hold food, in order that they really have a very good hermetic seal. This will hold any traumatic tick-tock sounds from leaking out.

You also can use a tumbler dome or cloche, the sort they use in bakeries, fancy restaurants, and cooking competitions. However, those aren’t the maximum hermetic alternative, because it handiest sits on a surface, as opposed to forming an hermetic seal round your clock. However, it'll lessen the sound.

The foremost downside of this technique is that it renders your clock unusable, besides for checking the time. This approach you could’t use the alarm characteristic of the alarm clock because it will appreciably have an effect on how loud the alarm can be.

So, you may both now no longer listen the alarm and sleep thru it, or get angry through having to open and near the box each time (aleven though this will really be a very good issue for individuals who pass lower back to mattress after their alarm!)

Method 5: Modify Your Clock


Depending at the wall clock you have, you could adjust it. It can be plenty less difficult on a small alarm clock than a big wall clock. However, there are a few matters you could do this will make a difference, no matter the clock kind you have.
Shorten the Hand

Your first alternative is to take the clock aside and shorten the second one hand. They usually make those of flimsy plastic in reasonably-priced alarm and wall clocks, so it need to be pretty easy.

The stepper motor that works the gears additionally controls the hand. This has a more potent pressure at positive factors and is slacker at others. This alternate in anxiety is due to the clock’s production and is the way it ticks from one minute to the next.

Once the stepper motor receives to a slack factor and releases anxiety, the strength will vibrate and journey down the hand. Often, this reasons that loud ticking each time.

To clear up this, you could truly reduce the second one hand down the usage of a couple of scissors. The shorter it's far, the much less flex it'll have in it at all. This approach vibrations will without difficulty dissipate, in place of developing large to make greater noise.

Just make certain you depart at the least 1/four of it at the back of, so that you can nevertheless see the seconds passing whilst you want to, even as decreasing the noise it'll make.

Method 6: Get a New Clock


Like we’ve said, if all else fails, simply get a brand new non-ticking clock. While all our tips will assist quiet a noisy ticking clock, we simply ought to be given the truth that maximum clocks tick.

Hearing a wall clock with loud tick tock noises is inevitable in case you are the usage of a reasonably-priced one.

Most of them aren't designed to be taken aside, so converting and tinkering with the gears may be difficult. Plus, those answers can cowl up the clock face or render it in reality unusable.

It honestly isn’t really well worth it except that wall clock is really well worth striking onto, such as though it's far a sentimental piece or an vintage which you’re inclined to concentrate to that clock tick.

So in case you actually need the wall clock tick-tock sound long gone even as nevertheless having a superbly practical clock, you handiest have one desire: take the wall clock you have, supply it away, and improve your clock.

The simplest answer is to shop for a virtual clock this is greater accurate, silent, and less difficult to examine due to the absence of fingers.

But in case you don’t need a virtual clock, then there are nevertheless lots of non-ticking clocks accessible for you. Just be organized to growth your finances a bit, aleven though now no longer through much.

In return, you get a noise-much less clock, and all of the unique functions greater current clocks have a tendency to be geared up with.

There also are many non-ticking clocks now, a good way to allow you to select from a lot of alternatives till you locate the only a good way to match the layout of your vicinity or room.

My view on How to Make A Clock Quieter


Whether you select to DIY or update your clock, we're positive you may locate the answer on your noisy trouble right here.

If you’ll turn out to be shopping for a brand new non-ticking clock instead, take a look at out our evaluation at the Best Silent Non Ticking Wall Clocks and Silent Analog Alarm Clocks to get you started.

You Also Like This: 

  • Best silent mouse
  • Best quiet fan
  • Difference between nrc vs stc
  • How to Squeaky Chairs
  • Best way to fix squeaky shoes
  • What Annoy Upstairs Neighbors
  • how to soundproof baby room
  • How to soundproof egg cartons
  • Guide on how to clock quiet
  • what is acoustic foam
  • Guide on squeaky chair
  • Batt and roll insulation

  • Related Keywords

    can you remove the second hand on a clock how to make a clock tick louder silent clock mechanism how to make an alarm clock quieter how to make a watch tick quieter how to make a cuckoo clock quieter non ticking clock mechanism loud ticking clock silent clock making noise how to make a battery operated clock quieter how to make your alarm clock quieter