• Saturday, February 20, 2021

    Soundproofing Resilient Channel installation Best Guide 2021 : Use Resilient Channel For wall or Ceiling?

    Soundproofing Resilient Channel installation

    In soundproofing, the most common approach to blocking noise transmission is through separation, with an emphasis on capturing or changing the environment around the noise transmission. The most effective solution for achieving this is to use resilient channel.

    During soundproofing, we work on almost any factor to block noise from the other side of the room or area with various best soundproofing material. However, we are not focused on the effect.

    They usually come from the ceiling, floor or walls and are not easily reduced without an appropriate impact noise approach.

    You may have read our detailed guide how soundproof wall using Resilient Channels, as we have learned how to use Resilient Channels to apply other layers of plasterboard to existing walls and to absorb noise.

    Therefore, various factors are covered in this guide, such as: B. what is a resilient channel? how to use a Resilient Channel?, how to install resilient channel?, how to install drywall on resilient channel?, an Resilient Channel versus a cap duct versus an resilient insulating clip.

    This detailed guide has the answers to all your questions, culminating in recommending some of the best resilient channel you can buying for soundproof wall, ceiling or floor.

    What is a Resilient Channel?

    A Resilient channel is a thin metal strip with pre-drilled hole on that can be easily screwed into an existing wall, bolt, or hard surface. This is also known as an RC or Z channel.

    If you want to attach an additional layer to an existing wall, the best solution is to use Resilient Channels. It divides the existing wall by installing an additional layer, so that a decoupling zone is created between them, where noise or sound waves can be easily detected.

    You can easily see what is a resilient channel is in the explanation video.

    The Resilient Channels are different types, some of which are one-legged, some of which are biped. Here feet mean the width and number of holes that can be drilled in the wall.

    Only some channels have only one row of openings, in others there are two rows of parallel series of holes, which are best fixed to the wall and quite stable in comparison to a single-leg channel.

    When you look at the duct size it is ideally between 1/2 inch deep and 8 feet long and you can choose a larger value depending on your needs.

    Now you may be wondering how effective are Resilient Channels and why you should use them. So let's focus on that to get more ideas.

    How Effective is a Resilient Channel should I used it?

    Even if you are soundproof of any house or room and plan to use a different technique, a very large area that you will be interested in is how to soundproof a wall, door or ceiling, After all, the best proposed solution would be to cover the existing environment with an extra layer, but why?

    If you've worked on our previous lessons where we covered various principles of soundproofing, such as:

    SoundProofing : This is the main technique where our main focus is to block the sound and prevent it from being sent any further.

    Sound Absorbing : The main focus of Sound Absorbing is to absorb sound waves and improve sound quality.

    Sound Dampening : When we work on dampening, our main focus is to reduce vibration and resonance.

    Decoupling : This is perhaps the main area where we focus on modifying the sound transmission environment so that it slows down and dissipates energy and reduces further vibration or sound wave transmission.

    Of the four principles, resilient channel contribute to decoupling, which reduces airborne noise from the other side of the wall or ceiling. If you have heard of the concept of an indoor space which is also possible with Resilient Channels, let me explain how it works?

    Suppose you have a problem with neighboring noise due to poor wall quality. The best solution for blocking noise is to place another layer on top of the existing wall. This can be done simply by attaching a layer of drywall directly to the existing wall, but it is not recommended.

    As if there is vibration on the other side of the wall, the existing drywall will also begin to vibrate and there is no point in making such adjustments, but an Resilient Channel will help separate the two walls.

    In a complete detailed guide of noise, we studied how noise is transmitted from one place to another, and in summary I must say that in a solid state, noise travels faster than air or a vacuum. So why not create a barrier to the environment? by set up a resilient channel.

    First fasten the resilient channel over the existing wall and now secure the drywall over the resilient channel. In this way, by defining the decoupling zone, you can get excellent isolation for the noise.

    Now, when the noises coming from the other side of the solid wall passes through the air or vacuum, it slows down and dissipates energy and then passes through the dry wall. Just for the recommended advice, you can use mass loaded vinyl or (MLV), over the top layer of drywall, which will blocking the noise of the drywall itself.

    You've heard of the Sound Transmission Class (STC) And Impact insulation class(IIC), Both ratings describe a material's ability to block sound transmission via impact noise. Hence, Resilient Channels will help increase the STC score or IIC scores of the existing wall and ceilings.

    Now that you have an idea of ​​how effective resilient channel are and why you should use them for soundproofing, let me give you a few more ideas about how different the resilient channel are from the hat channel, and sound isolation clip.

    Resilient Channel vs Hat Channel vs Sound Isolation Clip : Differences

    The Resilient channel is no doubt, a effective solution for reducing noise, but it is not the only solution for creating decoupling. There are several others, and in this list two notable ones are the resilient Hat channel, and a sound isolation clip.

    So far we have learned that the resilient channel is screwed directly into the wall and drywall or other additional isolation layer such as drywall and others can be applied over it like plasterboard. However, there is an added advantage of using a Hat channel.

    Hat channel is use with sound isolation clip which are first installed on an existing wall. An isolation clip is added and hat channel is attached to the isolation clip. You can then arrange your additional layer as plasterboard or drywall.

    The advantage here is that this time the noise has to pass through an additional layers of sound isolation clip, then through the Hat channel, and then through the last top layer, which increases the decoupling zone and makes it easier to understanding the larger the decoupling zone, the more energy it loses.

    However, using resilient channels and applying green glue between the layers of the wall can also remove most of the noise or energy and achieve the same noise reduction. So it's up to you to choose which one.

    So far, you are sure what is a resilient channel, how effective they are and why you should use them. So let me select the best resilient channel, and hat channel which is effective enough for your noise reduction purposes.

    Best Resilient Channel and Hat Channel and Sound insolation clip : In Detlaid

    I think you're sure by now who to buy, but here are some initial guidelines to assure you that whatever you buy will meet what the major sustainable resilient channels need.

    Here are some points you should always check:

    Length:Length Ideally, an Resilient Channel is 8 feet long.

    Gauge:Length Ideally, each resilient channel is made of steel 20-25 thickness.

    Depth : This is an important point that determines what air gap to create. Ideally, it should be in the 1/2 inch range.

    Density : This determines the hardness of the channel. So try to use thicker ducts so they screw into the wall easily.

    Price : Price is important for quality, the more you spend the more quality you get.

    The depth of the resilient channel is half that of the hat channel due to the added layers of sound isolation clip, but the results are very similar. So let's discussed the best resilient channel.

    Best Resilient channel

    First, let's discuss the available best resilient channels that fit our needs. As we have seen, no sound isolation clip are needed, so only the best that people buy and experience with positive feedback are played.

    The Auralex RC-8 Resilient Channel

    This is a one-leg resilient channel made by a acoustical manufacturing company call Auralex Acoustic that will best meet all your needs.

    It's made for the same reason to hang drywall instead of attaching it directly to the wall, where this most resilient channel is 8 feet long, an ideal 25-size duct that creates strong insulation to keep sound from transferring walls.

    Following are the functions of the RC-8 channels.

    Length: 8 feet

    Dimensions: 25

    Material: steel

    Airbag: 1/2 "

    This resilient channels is ideal for your needs if it is long and tight enough to attach to the wall and creates the air gaps needed for an ideal decoupling zone.

    This product is ideal for use in your room, private space, bedroom, office for soundproof walls or ceilings.

    The box you bought has a total of 24 sections, each of which is an 8-foot long resilient channel. Two product groups are offered here, one RC-8 and the other RC-1. So I recommend using the RC-8 as it is wide and compact enough to function and install perfectly.

    The RC-8 must be installed horizontally at the bottom or top of the wall for proper installation. They claim that about 2 layers of drywall per 5/8 inch can be hung on the RC-8's Resilient Channels with an additional layer of sheet metal block.

    I trust Amazon sellers so I checked feedback from Auralex RC8 Resilient Channel customers and then suggested it here, but I advise you to look for more if you're looking for something else.

    The Trademark RC-1 Resilient Channel

    The previous choice was if you were looking for a durable RC-8 Resilient channel, but in the same list there is a very well-known, durable resilient channel made by Trademark, Soundproofing which is the leg of the RC-1.

    It is your cost-effective solution to reduce sound transmission on steel and wood partition. This resilient channel will have a pack of 32 pieces, each 8 'long.

    In reviewing its features, we have highlights:


    : 2.0 "W x 0.5" D x 96 "L.


    : 25


    : steel


    : 1/2 "

    As with any channel, there is no need for a sound isolation clip that penetrates directly into the wall. It can hold two layers of drywall weighing about 1.6 pounds.

    As previously mentioned, if you are looking for an inexpensive solution, you should only choose the RC-1, not the RC-8. It is mainly designed for walls and will block out noise.

    The Best Hat Channel and Sound Isolation Clip

    There may be a very limited number of ways to find the best, but I've gone through a few ways to make the most of them, and here we have our best finds.

    Best Hat Channel and Sound Isolation Clip :

    They offer a 2 foot flexible Resilient hat metal channel, with a 25 Guage metal quality, that works with standard sound isolation clip.

    This conduit is designed for easy storage of two layers of drywall, each 5/8 inch wide. Available in a pack of 20 pieces, each 8.6 'long, which is enough to create a soundproofing ceiling.

    The functions for the Hat Channel are listed here.


    : 8.6 ′


    : 25


    : steel


    : 7/8 "

    Remember that the hat channel clicks on the clip. Therefore, it is always advisable to use a series of clips and it is never recommended to penetrate the hat channel, which indirectly reduces the insulation property.

    It is up to you who wish to apply implement resilient or Hat channel, but the resilient Hat channel made by Trademark are the ones in my opinion the best among all Amazon products available.

    Best Resilient Sound Isolation Clip by Trademark

    The Resilient sound isolation clip is also known as RSIC and helps increase the partition's STC rating. The best Trademark Soundproofing is made here, where you can get a set of 10 RSIC-1 brackets plus 10 screws and an inexpensive mounting guide.

    It is much better to use it on Wood, steel, ceiling or floor, concrete, wall, ceiling and floor where it is said to receive an additional 15 STC than using only Resilient Channels.

    Here are the highlights.

    Pieces: 10

    Increase in STC

    : 15

    Ideal cap channel sizes

    : 7/8 "deep and 2.5" wide

    Well, when using an resilient Hat channel, you basically need a sound clip. If you want to cover about 250 square feet of space with 10 inch walls you will probably need around 150 clips for your 4 walls at around 65 * 10 feet so better check the manual for the specifications.

    Where few people suggest to use it with MLV for studs and on top of that you can set up this RSIC. The products most recommended by consumers come from Amazon. For you, you should check which specification you need.

    I think you've learned a lot so far about Resilient channel, Hat resilient Channel, and sound isolation clip and the best of those available.

    Before closing this detailed guide, I will show you how to install resilient channel, as we will be focusing more on a Resilient channels rather than a Hat Channel.

    How Do You Install a Resilient Channel on a Wall or Ceiling?

    Buying the right product is a key element, but how effective it is at sound isolation or noise reduction, depends entirely on how correctly you install a Resilient channel.

    For a quick recap of installation channel on ceiling , you can also get help from the video below.

    So let's go over the main factors you need to be aware of or your entire setup will become unusable and you won't get much return on your investment.

    Identify the Best place of the Stud:

    If you can see the stud or joist, you may be able to drilled the Resilient channels directly with screws. However, if you can't see it, you'll need to remove the existing drywall first to get the studs.

    If you're near a stud, find the best noise socket and plan your control box and wiring accordingly.

    Now that the drywall is removed, you will have space between the studs or joist. For properly isolation of sound, I recommend filling it with soundproof insulation materials.

    Drilled your channel against the wall or ceiling

    The Resilient Channel is attached at right angles to the stud when attached to a wall or ceiling. For walls, make sure all the narrow flanges are on the bottom and the larger ones are on the top.

    Find the center of the stud to drill right next to the Resilient Channel.

    When installing resilient channels, make sure to have a cut area of ​​about 1/4 inch along the side edges and 4-6 inches across the top and bottom of the wall.

    Have someone help you as you drill a resilient channel. Otherwise, you can lose linear fixation and possibly unnecessary holes in the wall.

    When you work the walls, the studs are vertical. So position the Resilient Channel horizontally. However, on the ceiling it is much better to use a ladder for easy installation.

    Set Layer of Drywall on Resilient Channel

    Basically, you've decided that you want to attach thick soundproof drywall to the elastic or make a drywall sandwich with green glue.

    Soundproof drywall has an STC rating above 50, so you don't need green glue, but you can make drywall sandwiches using green glue.

    This time you need to hang the drywall near the Resilient Channel and mark points on the drywall sheet to make sure you are drilling the holes in the right places.

    Now drill the screw through the drywall and then through the Resilient Channel, making sure it doesn't go through the posts. Otherwise, a direct connection to the main wall will be made and will be less effective.

    If you have done this installation, it means that this time you will need to cover your walls with an additional blocker, which is not mandatory.

    Additional tips

    If you expect further improvements in sound insulation, it is recommended that you use Mass loaded vinyl on the studs before drill Resilient channel and in drywall to add extra density or bulk to the walls and block noise from the other side.

    Use green glue between the primary and secondary walls. Due to its viscous nature, it removes all sound energy into heat and causes less noise transmission.

    This is the end of sustainable ducts and their best products available on the market, how effective they are and why you should use them, and in the end we learn how to perfectly fit soundproof brackets, Resilient Channels and drywall.

    My Opinion On Use Of Resilient Channel?

    Well, there is nothing to say about Resilient Channels because we have been through a lot, but in summary I must say that it is better if you struggle with impact noise, from the ceiling or airborne noise, on the other side of the wall. have to install an Resilient Channel.

    If you can make a decouple zone with the help of Resilient Channels, you will definitely reduce the quality of the noise, and almost everyone uses it specifically for soundproof a ceiling or wall.

    I recommend using soundproof drywall, that is thicker than regular drywall. If you do not have one, it is better to make a sandwich out of thin layers of drywall to effection isolation.

    If you have used one of the methods above, please share our experience with our readers so that they can plan their next purchase accordingly.

     Recommended guides:

  • Guide on use quiet clock
  • Guide on acoustic foams for wall
  • Guide on use squeaky chair
  • List of Backyard soundproofing
  • how to soundproof booths
  • Related Keywords

    resilient channel best resilient channel home depot resilient channel resilient channels home depot resilient channel for ceiling resilient channel installation installing resilient channel resilient channel vs hat channel hat channel vs resilient channel resilient channel sizes hat channel for soundproofing hat channel soundproofing resilient channel clips where to buy resilient channel resilient channel rc-1 vs rc resilient channel spacing green glue vs resilient channel resilient channel vs green glue double drywall on resilient channel do resilient channels work does resilient channel work resilient channel over existing drywall is resilient channel worth it rc-2 resilient channel resilient channels for quiet rock channel walls clips for handing drywall metal channel resilient insulation problems with resilient channel soundproofing resilient channel spacing rc2 channel rc-1 resilient channel installation resilient channel wall detail proper installation of rc channel best ceiling drywall soundproofing solution rc1 noise suppressor double leg resilient channel resilient channel on walls rc1 channel resilient channel rc-1 for ceiling how to install resilient channel Soundproofing Resilient Channel installation 1 Soundproofing Resilient Channel installation 2 Soundproofing Resilient Channel installation 3 Soundproofing Resilient Channel installation 4 Soundproofing Resilient Channel installation 5 Soundproofing Resilient Channel installation 6 Soundproofing Resilient Channel installation 7 Soundproofing Resilient Channel installation 8 Soundproofing Resilient Channel installation 9 Soundproofing Resilient Channel installation 10 Soundproofing Resilient Channel installation 11 Soundproofing Resilient Channel installation 12 Soundproofing Resilient Channel installation 13 Soundproofing Resilient Channel installation 14 Soundproofing Resilient Channel installation 15 Soundproofing Resilient Channel installation 16 Soundproofing Resilient Channel installation 17 Soundproofing Resilient Channel installation 18 Soundproofing Resilient Channel installation 19 Soundproofing Resilient Channel installation 20 Soundproofing Resilient Channel installation 21 Soundproofing Resilient Channel installation 22 Soundproofing Resilient Channel installation 23 Soundproofing Resilient Channel installation 24 Soundproofing Resilient Channel installation 25

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    No comments:

    Post a Comment